Custom Cleaning Brush
100x400mm Horsehair Polishing Roller Brush
100x400mm Horsehair Polishing Roller Brush provides controlled brush contact for Polishing across flat faces, profiles, and edges. Working width, brush geometry, mounting, and fill are set around the machine path and the way polishing compound, fine oxide, and fibers must be released or carried away.
Product Features
100 mm diameter and 400 mm face width provide soft rotary polishing contact.
Horsehair distributes compound and captures fine dust — The natural fill suits delicate finishing.
Flexible fibers follow surface contours — The roller limits hard point loading.
Straight or helical fill patterns — Contact can be uniform or directional.
Balanced core and shaft support smooth rotation — Suitable for continuous finishing lines.
Hair grade, trim, density, core, shaft ends, and compound compatibility can be customized.
Product Overview
100x400mm Horsehair Polishing Roller Brush is used where repeatable contact is needed across flat faces, profiles, and edges rather than isolated hand cleaning. The active brush face clears polishing compound, fine oxide, and fibers while the holder, shaft, plate, or hub stays outside the interference path and supports the required working width. The brush must cover the moving path, accommodate tracking, and discharge residue away from the product zone.
Key dimensions start with Brush head diameter 100 mm, Brush head length 400 mm, and Handle length 0 mm. The structure uses a roller or conveyor arrangement so the brush can follow a moving surface or machine path. The specified interface is fixed. Horsehair are the principal material directions in the current specification. Powered brush selection requires the actual shaft or hub details and the speed used by the equipment.
Technical Specifications
| Head diameter | 100 mm |
|---|---|
| Head shape | Round |
| Head length | 400 mm |
| Bristle material | HORSEHAIR |
| Handle/base material | Beech Wood |
| Handle length | 0 mm |
| Grip diameter | 0 mm |
| Connection | Fixed |
| Cleaning method | Dry Brushing |
| Applicable media | Polishing Compound / Oil / No Added Medium |
Application Areas
100x400mm Horsehair Polishing Roller Brush is primarily mapped to Polishing. When adapting this brush to another job, confirm the workpiece surface, how debris will leave the area, and the required finish.
- 100x400mm Horsehair Polishing Roller Brush is configured for Polishing.
- The active brush contact follows flat faces, profiles, edges, cylindrical parts, panels, and finished components while the fill displaces polishing compound, fine oxide, fibers, haze, and light surface residue.
- Use this configuration when the dimensions, access path, mounting interface, operating motion, chemistry, and allowable surface contact match the stated project conditions.
Selection Guidance
Structure fit
Match the roller and conveyor brush geometry to flat faces, profiles, and edges, the available access, and powered operation. Confirm Brush head diameter 100 mm, Brush head length 400 mm, and Handle length 0 mm against the complete working envelope before finalizing the brush.
Contact material
Choose from Horsehair according to the behavior of polishing compound, fine oxide, and fibers, the surface sensitivity, and any wet, chemical, temperature, or hygiene requirements. To set the right stiffness, confirm the filament diameter, free trim, and density as well as the material.
When to use another solution
For 100x400mm Horsehair Polishing Roller Brush, use another cleaning method when polishing compound, fine oxide, and fibers cannot be released by controlled filament contact, when flat faces, profiles, and edges cannot tolerate the selected contact material, or when the access path prevents safe engagement and residue removal.
Customization Options
| Brush Head Diameter (mm) | 100 |
|---|---|
| Brush Head Length (mm) | 400 [Industry Reference Range; Legacy Source] |
| Handle Length (mm) | 0 |
| Handle Grip Diameter (mm) | 0 |
| Bristle Material | Horsehair |
| Handle Material | Beech Wood |
| Mounting / Interface | Fixed |
| Grip Style | No Handle (Equipment-Mounted) |
| Color | Black |
| Logo Process | Laser Engraving |
| Surface Treatment | Clear-Coated |
RELATED BRUSH RESOURCES
Recommended Reading & Related Brush Resources
Custom Roller and Conveyor Brushes
Choose a roller or conveyor brush when a cylindrical brush must clean, wipe, guide,…
Explore this brush type
Polishing
Polishing is a process-use page rather than a general cleaning category.
Review application guidance
Surface Finishing
Surface Finishing is a process-use page rather than a general cleaning category.
Review application guidance
Horsehair
Horsehair is selected from its stiffness, recovery, wear, wet-service, chemical, and temperature behavior.
Compare material considerationsCustom Manufacturing RFQ
Upload the Brush Drawing, Product Photo or Sample Details
Please share the brush dimensions, working area, residue type, material direction, quantity, and a drawing or photo for quotation.
Custom Brush RFQ
Send Your Brush Project
Upload a drawing, product photo, or sample photo and provide the core dimensions and cleaning conditions.