Custom Cleaning Brush
Strip Brush Conveyor Belt
Strip Brush Conveyor Belt provides controlled brush contact for conveyor and production-line cleaning across belts, rollers, and chains. Working width, brush geometry, mounting, and fill are set around the machine path and the way powder, crumbs, and fibers must be released or carried away.
Product Features
Continuous linear bristle edge cleans the moving belt — The strip removes loose crumbs, dust, fibers, and light carryback at a defined contact point.
Nylon flexes over splices and surface variation — The brush follows small height changes without a rigid scraping blade.
Channel mounting fits narrow conveyor clearances — The strip can install beneath guards, along belt edges, or at transfer points.
Angled trim can guide loosened debris toward collection — Bristle orientation controls the discharge direction.
Replaceable strip simplifies wear maintenance — The working element can slide or bolt out of its holder.
Built around the conveyor — Strip length, nylon grade, trim, density, channel, mounting holes, and engagement can be customized.
Product Overview
Strip Brush Conveyor Belt is used where repeatable contact is needed across belts, rollers, and chains rather than isolated hand cleaning. The active brush face clears powder, crumbs, and fibers while the holder, shaft, plate, or hub stays outside the interference path and supports the required working width. The brush must cover the moving path, accommodate tracking, and discharge residue away from the product zone.
Key dimensions start with Brush head length 100–3000 mm. The structural layout follows the strip seal brush category. The specified interface is fixed / screw-fastened / adhesive-bonded. Nylon PA are the principal material directions in the current specification. The holder and installed engagement should keep the working edge in contact without excessive compression or drag.
Technical Specifications
| Custom strip length | 100–3000 mm |
|---|---|
| trim height | 12.7–152.4 mm |
| Channel width | 3.2–14.3 mm |
| Filament diameter | 0.10–1.27 mm |
| Working compression | 5–25% of trim height |
| Holder | Straight channel, aluminum carrier, angle holder, or custom profile |
| Contact setting | Use 5–15% trim compression for wiping and dust control; 10–25% for sealing without crushing the fill. |
| Fill materials | Nylon PA |
| Cleaning zone | conveyor and production-line cleaning |
| Contact surface | belts, rollers, chains, rails, transfer points, web paths, and machine guides |
| Residue class | powder, crumbs, fibers, chips |
| Access and motion | the brush must cover the moving path, accommodate tracking, and discharge residue away from the product zone |
| Cleaning duty | conveyor, production-line cleaning on belts, rollers, chains, rails |
| Variant configuration | Strip Brush Conveyor Belt: roller, strip, channel strip construction with Nylon PA fill for conveyor and production-line cleaning on belts, rollers, chains, rails. |
Application Areas
Strip Brush Conveyor Belt is primarily mapped to Conveyor Belt Cleaning. Before changing the application, review the contact surface, debris removal path, and acceptable surface condition.
- Strip Brush Conveyor Belt is best suited to sealing, guiding, wiping, dust control, cable entry, door gap, machine guard, conveyor edge, and process-line contact.
- The straight, formed, coiled, holder-mounted, or conductive strip brush follows gaps, doors, cable openings, machine rails, conveyors, furnace openings, screens, and equipment edges while the fill displaces air, dust, mist, light, noise, insects, granules, oil, residue, and loose debris.
- Use this configuration when the available access supports continuous line contact for wiping, sealing, guiding, cleaning, or blocking gaps.
Selection Guidance
Structure fit
Match the strip seal brush geometry to belts, rollers, and chains, the available access, and fixed contact. Confirm Brush head length 100–3000 mm against the complete working envelope before finalizing the brush.
Contact material
Choose from Nylon PA according to the behavior of powder, crumbs, and fibers, the surface sensitivity, and any wet, chemical, temperature, or hygiene requirements. Choose stiffness by looking at filament size, free trim length, and density together with the material.
When to use another solution
For Strip Brush Conveyor Belt, use another cleaning method when powder, crumbs, and fibers cannot be released by controlled filament contact, when belts, rollers, and chains cannot tolerate the selected contact material, or when the access path prevents safe engagement and residue removal.
Customization Options
| Brush Head Diameter (mm) | Not Applicable (Linear strip or seal profile) |
|---|---|
| Brush Head Length (mm) | 100–3000 |
| Handle Length (mm) | Not Applicable (No separate handle in this product configuration) |
| Handle Grip Diameter (mm) | Not Applicable (No explicit grip or handle-diameter dimension in the product specification) |
| Bristle Material | Nylon PA |
| Handle Material | 6063 Aluminum Alloy |
| Mounting / Interface | Fixed / Screw-Fastened / Adhesive-Bonded |
| Grip Style | Not Applicable (Strip Brush) |
| Color | Custom PANTONE Color ([Industry Reference Range]) |
| Logo Process | Laser Engraving / Screen Printing / Pad Printing ([Industry Reference Range]) |
| Surface Treatment | Smooth / Textured / Overmolded / Coated (Depending on Substrate; [Industry Reference Range]) |
Frequently Asked Questions
How should Strip Brush Conveyor Belt be selected?
Start with sealing, guiding, wiping, dust control, cable entry, door gap, machine guard, conveyor edge, and process-line contact, gaps, doors, cable openings, machine rails, conveyors, furnace openings, screens, and equipment edges, and air, dust, mist, light, noise, insects, granules, oil, residue, and loose debris. Then set Custom strip length, trim height, and Channel width, choose the fill from the material and residue table, and match the mounting interface and operating condition.
Which dimensions define Strip Brush Conveyor Belt?
The primary dimensions are Custom strip length (100–3000 mm), trim height (12.7–152.4 mm), and Channel width (3.2–14.3 mm). Also provide the minimum clearance, working envelope, trim or engagement, and the existing holder, shaft, stem, thread, or handle.
Which filament or contact material is used for Strip Brush Conveyor Belt?
The primary options are Nylon PA. The final choice follows surface sensitivity, residue adhesion, wet or dry use, temperature, chemicals, conductivity, and required cutting action.
When is Strip Brush Conveyor Belt not the best cleaning method?
Strip Brush Conveyor Belt is not the first choice for rubber lips, foam, labyrinth seals, air curtains, or rigid scrapers when pressure sealing or liquid containment is required.
What information is required to quote Strip Brush Conveyor Belt?
Send the part or machine drawing, photos of gaps, doors, cable openings, machine rails, conveyors, furnace openings, screens, and equipment edges, Custom strip length, trim height, Channel width, and Filament diameter, the residue description, wet or dry conditions, motion or use method, temperature, preferred Nylon PA, quantity, and the existing interface or sample.
RELATED BRUSH RESOURCES
Recommended Reading & Related Brush Resources
Custom Strip Seal Brushes
Choose a strip seal brush when a continuous line of filament must seal, wipe,…
Explore this brush type
Conveyor Belt Cleaning
For Conveyor Belt Cleaning, the brush must reach the working area, disturb or collect…
Review application guidance
Industrial Machine Cleaning
For Industrial Machine Cleaning, the brush must reach the working area, disturb or collect…
Review application guidance
Nylon PA
Nylon PA is selected from its stiffness, recovery, wear, wet-service, chemical, and temperature behavior.
Compare material considerationsCustom Manufacturing RFQ
Upload the Brush Drawing, Product Photo or Sample Details
To prepare the correct quotation, provide the dimensions, cleaning task, residue, material, mounting details, quantity, and a drawing or photo.
Custom Brush RFQ
Send Your Brush Project
Upload a drawing, product photo, or sample photo and provide the core dimensions and cleaning conditions.