Custom Cleaning Brush
300mm PA66 Water Treatment Filter Brush
300mm PA66 Water Treatment Filter Brush is built for Aquarium Filtering where the brush must enter or follow filter chambers, filter media, and screens. Head size, working length, stem flexibility, and fill are selected to loosen biofilm, algae, and sludge without losing access or control.
Product Features
300 mm brush length fits compact water-treatment filter chambers.
PA66 filaments intercept suspended solids and provide open surface area — Water can flow between bristles.
Hanging installation simplifies removal and cleaning — Rings or hooks can be supplied.
Resilient filaments maintain shape during immersion — The brush can be reused.
Density and filament size can balance capture and flow — The filter can be tuned.
Brush diameter, PA66 filament, density, hanger, support, and installation spacing can be customized.
Product Overview
300mm PA66 Water Treatment Filter Brush uses a working section shaped around the available opening, depth, and internal profile. It contacts filter chambers, filter media, and screens to remove biofilm, algae, and sludge; the access path and minimum clearance determine whether the brush needs a rigid stem, a flexible extension, a tapered head, or a stepped cleaning section. Brush diameter, working length, tip form, and stem flexibility must match the complete passage.
Key dimensions start with Brush head diameter 100 mm, Brush head length 300 mm, and Handle length 0 mm. The structural layout follows the filter brush category. The specified interface is fixed. PA66 Nylon are the principal material directions in the current specification. Handle length, neck shape, and head size should support comfortable control and avoid excessive contact pressure.
Technical Specifications
| Head diameter | 100 mm |
|---|---|
| Head shape | Round |
| Head length | 300 mm |
| Bristle material | PA66 |
| Handle/base material | Polypropylene (PP) |
| Handle length | 0 mm |
| Grip diameter | 0 mm |
| Connection | Fixed |
| Cleaning method | Soaking |
| Applicable media | Water / Neutral Detergent |
Application Areas
300mm PA66 Water Treatment Filter Brush is primarily mapped to Aquarium Filtering. Before applying the brush to another process, verify the surface, the route for removed debris, and the final finish target.
- 300mm PA66 Water Treatment Filter Brush is configured for Aquarium Filtering.
- The active brush contact follows filter chambers, filter media, screens, cartridges, intake slots, and pump passages while the fill displaces biofilm, algae, sludge, suspended solids, and mineral deposits.
- Use this configuration when the dimensions, access path, mounting interface, operating motion, chemistry, and allowable surface contact match the stated project conditions.
Selection Guidance
Structure fit
Match the filter brush geometry to filter chambers, filter media, and screens, the available access, and manual operation. Confirm Brush head diameter 100 mm, Brush head length 300 mm, and Handle length 0 mm against the complete working envelope before finalizing the brush.
Contact material
Choose from PA66 Nylon according to the behavior of biofilm, algae, and sludge, the surface sensitivity, and any wet, chemical, temperature, or hygiene requirements. The material name does not fully describe stiffness. Filament size, free trim length, and density complete the specification.
When to use another solution
For 300mm PA66 Water Treatment Filter Brush, use another cleaning method when biofilm, algae, and sludge cannot be released by controlled filament contact, when filter chambers, filter media, and screens cannot tolerate the selected contact material, or when the access path prevents safe engagement and residue removal.
Customization Options
| Brush Head Diameter (mm) | 100 |
|---|---|
| Brush Head Length (mm) | 300 |
| Handle Length (mm) | 0 |
| Handle Grip Diameter (mm) | 0 |
| Bristle Material | PA66 Nylon |
| Handle Material | Polypropylene PP |
| Mounting / Interface | Fixed |
| Grip Style | Ring Handle |
| Color | Black |
| Logo Process | Not Applicable (No Logo Area) |
| Surface Treatment | Smooth |
RELATED BRUSH RESOURCES
Recommended Reading & Related Brush Resources
Custom Filter Brushes
Choose a filter brush when an open brush body must collect, intercept, agitate, or…
Explore this brush type
Aquarium Filtering
Aquarium Filtering is a process-use page rather than a general cleaning category.
Review application guidance
Pond Filter Cleaning
For Pond Filter Cleaning, the brush must reach the working area, disturb or collect…
Review application guidance
PA66 Nylon
PA66 Nylon is selected from its stiffness, recovery, wear, wet-service, chemical, and temperature behavior.
Compare material considerationsCustom Manufacturing RFQ
Upload the Brush Drawing, Product Photo or Sample Details
For an accurate quotation, please provide the main dimensions, material preference, working surface, residue, quantity, and a drawing or photo.
Custom Brush RFQ
Send Your Brush Project
Upload a drawing, product photo, or sample photo and provide the core dimensions and cleaning conditions.