Custom Cleaning Brush
Brush Line
Brush Line provides controlled brush contact for slot, rail, and pin across slots, guide rails, and pins. Working width, brush geometry, mounting, and fill are set around the machine path and the way dust, chips, and grease must be released or carried away.
Product Features
Continuous Linear Contact — A strip or line brush wipes, seals, guides, cleans, or controls dust along a rail, slot, edge, or machine path.
Fits Narrow and Extended Installations — Straight lengths can cover small openings or long production sections without requiring a rotating assembly.
Channel and Filament Work as One System — Backing size, holder angle, bristle height, and stiffness determine the contact and fit.
Cut-to-Length and Curved Options — Brush line can be supplied in straight pieces, coils, formed curves, or segmented lengths for the machine geometry.
Replaceable Insert Design — A separate holder can allow the worn brush strip to be changed without removing the complete frame.
Configured to the Path — Length, backing, trim, density, filament, holder, mounting holes, and compression can be customized.
Product Overview
Brush Line is used where repeatable contact is needed across slots, guide rails, and pins rather than isolated hand cleaning. The active brush face clears dust, chips, and grease while the holder, shaft, plate, or hub stays outside the interference path and supports the required working width. The head must enter the narrow path and follow its full length without wedging or contacting adjacent sensors and seals.
Key dimensions start with Brush head length 100–3000 mm. The structural layout follows the strip seal brush category. The specified interface is fixed / screw-fastened / adhesive-bonded. Nylon PA, PBT, and Polypropylene PP are the principal material directions in the current specification. The holder and installed engagement should keep the working edge in contact without excessive compression or drag.
Technical Specifications
| Overall length | 100–3000 mm |
|---|---|
| Trim height | 10–300 mm |
| Backing width | 3–25 mm |
| Filament diameter | 0.05–1.00 mm |
| Holder | Aluminum, steel, PVC, or custom profile |
| Mounting | Screw, slot, adhesive, or clamp |
| Contact setting | Use 5–15% trim compression for wiping and dust control; 10–25% for sealing without crushing the fill. |
| Fill materials | Nylon PA, PBT, and Polypropylene PP |
| Cleaning zone | slot, rail, pin, harness, and narrow-machine-path cleaning |
| Contact surface | slots, guide rails, pins, harness channels, linear tracks, and machine contact points |
| Residue class | dust, chips, grease, oxide |
| Access and motion | the head must enter the narrow path and follow its full length without wedging or contacting adjacent sensors and seals |
| Cleaning duty | slot, rail, pin on slots, guide rails, pins, harness channels |
| Variant configuration | Brush Line: strip construction with Nylon PA, PBT, Polypropylene PP fill for slot, rail, pin, harness, and narrow-machine-path cleaning on slots, guide rails, pins, harness channels. |
Application Areas
Brush Line is primarily mapped to Industrial Machine Cleaning. When adapting this brush to another job, confirm the workpiece surface, how debris will leave the area, and the required finish.
- Brush Line is best suited to continuous linear wiping, guiding, sealing, and debris control.
- The straight, formed, coiled, holder-mounted, or conductive strip brush follows conveyor edges, machine openings, panels, doors, product paths, and linear contact zones while the fill displaces dust, chips, fibres, mist, light leakage, and loose particles.
- Use this configuration when the available access supports continuous line contact for wiping, sealing, guiding, cleaning, or blocking gaps.
Selection Guidance
Structure fit
Match the strip seal brush geometry to slots, guide rails, and pins, the available access, and fixed contact. Confirm Brush head length 100–3000 mm against the complete working envelope before finalizing the brush.
Contact material
Choose from Nylon PA, PBT, and Polypropylene PP according to the behavior of dust, chips, and grease, the surface sensitivity, and any wet, chemical, temperature, or hygiene requirements. Choose stiffness by looking at filament size, free trim length, and density together with the material.
When to use another solution
For Brush Line, use another cleaning method when dust, chips, and grease cannot be released by controlled filament contact, when slots, guide rails, and pins cannot tolerate the selected contact material, or when the access path prevents safe engagement and residue removal.
Customization Options
| Brush Head Diameter (mm) | Not Applicable (Linear strip or seal profile) |
|---|---|
| Brush Head Length (mm) | 100–3000 |
| Handle Length (mm) | Not Applicable (No separate handle in this product configuration) |
| Handle Grip Diameter (mm) | Not Applicable (No explicit grip or handle-diameter dimension in the product specification) |
| Bristle Material | Nylon PA, PBT, Polypropylene PP |
| Handle Material | 6063 Aluminum Alloy |
| Mounting / Interface | Fixed / Screw-Fastened / Adhesive-Bonded |
| Grip Style | Not Applicable (Strip Brush) |
| Color | Custom PANTONE Color ([Industry Reference Range]) |
| Logo Process | Laser Engraving / Screen Printing / Pad Printing ([Industry Reference Range]) |
| Surface Treatment | Smooth / Textured / Overmolded / Coated (Depending on Substrate; [Industry Reference Range]) |
Frequently Asked Questions
How should Brush Line be selected?
Start with continuous linear wiping, guiding, sealing, and debris control, conveyor edges, machine openings, panels, doors, product paths, and linear contact zones, and dust, chips, fibres, mist, light leakage, and loose particles. Then set Overall length, Trim height, and Backing width, choose the fill from the material and residue table, and match the mounting interface and operating condition.
Which dimensions define Brush Line?
The primary dimensions are Overall length (100–3000 mm), Trim height (10–300 mm), and Backing width (3–25 mm). Also provide the minimum clearance, working envelope, trim or engagement, and the existing holder, shaft, stem, thread, or handle.
Which filament or contact material is used for Brush Line?
The primary options are Nylon PA, PBT, and Polypropylene PP. The final choice follows surface sensitivity, residue adhesion, wet or dry use, temperature, chemicals, conductivity, and required cutting action.
When is Brush Line not the best cleaning method?
Brush Line is not the first choice for rubber lips, foam, labyrinth seals, air curtains, or rigid scrapers when pressure sealing or liquid containment is required.
What information is required to quote Brush Line?
Send the part or machine drawing, photos of conveyor edges, machine openings, panels, doors, product paths, and linear contact zones, Overall length, Trim height, Backing width, and Filament diameter, the residue description, wet or dry conditions, motion or use method, temperature, preferred Nylon PA, PBT, and Polypropylene PP, quantity, and the existing interface or sample.
RELATED BRUSH RESOURCES
Recommended Reading & Related Brush Resources
Custom Strip Seal Brushes
Choose a strip seal brush when a continuous line of filament must seal, wipe,…
Explore this brush type
Industrial Machine Cleaning
For Industrial Machine Cleaning, the brush must reach the working area, disturb or collect…
Review application guidance
Dust Removal
For Dust Removal, the brush must reach the working area, disturb or collect loose…
Review application guidance
Nylon PA
Nylon PA is selected from its stiffness, recovery, wear, wet-service, chemical, and temperature behavior.
Compare material considerations
PBT
PBT is selected from its stiffness, recovery, wear, wet-service, chemical, and temperature behavior. Do…
Compare material considerationsCustom Manufacturing RFQ
Upload the Brush Drawing, Product Photo or Sample Details
For a custom quote, we need the key dimensions, surface or part, residue, material preference, quantity, and reference image or drawing.
Custom Brush RFQ
Send Your Brush Project
Upload a drawing, product photo, or sample photo and provide the core dimensions and cleaning conditions.