Custom Cleaning Brush
Brush Roller Glass
Brush Roller Glass provides controlled brush contact for conveyor and production-line cleaning across belts, rollers, and chains. Working width, brush geometry, mounting, and fill are set around the machine path and the way powder, crumbs, and fibers must be released or carried away.
Product Features
Soft continuous contact for glass surfaces — The roller cleans, supports, or transports panels.
Low-marking nylon contact — Filament diameter, trim, and density can be selected for standard or coated glass.
Uniform pressure across the width — Even tufting reduces point loading on fragile glass.
Straight and helical patterns — The layout can clean uniformly or move debris laterally.
Balanced core and shaft — Accurate construction supports smooth rotation.
Built to the glass line — Diameter, face width, profile, fill, shaft, and mounting can be customized.
Product Overview
Brush Roller Glass is used where repeatable contact is needed across belts, rollers, and chains rather than isolated hand cleaning. The active brush face clears powder, crumbs, and fibers while the holder, shaft, plate, or hub stays outside the interference path and supports the required working width. The brush must cover the moving path, accommodate tracking, and discharge residue away from the product zone.
Key dimensions start with Brush head diameter 100–250 mm and Brush head length 300–2000 mm. The design follows a roller and conveyor-brush layout for full-width or repeating contact. The specified interface is shaft-mounted / quick-change coupling. Nylon PA are the principal material directions in the current specification. For powered use, provide the machine, mounting interface, rotation direction, and operating speed.
Technical Specifications
| Working width | 300–2000 mm |
|---|---|
| Brush diameter | 100–250 mm |
| Trim length | 20–40 mm |
| Nylon filament diameter | 0.05–0.25 mm |
| Core or shaft | Machine-specific bore, key, or through-shaft |
| Helix | Straight row, helical, or segmented build |
| Contact setting | Use 1–5 mm engagement, low runout, and full-width support to avoid bands or edge loading. |
| Surface load | 0.5–3 N/cm² for controlled low-pressure contact |
| Fill materials | Nylon PA |
| Cleaning zone | conveyor and production-line cleaning |
| Contact surface | belts, rollers, chains, rails, transfer points, web paths, and machine guides |
| Residue class | powder, crumbs, fibers, chips |
| Access and motion | the brush must cover the moving path, accommodate tracking, and discharge residue away from the product zone |
| Cleaning duty | conveyor, production-line cleaning on belts, rollers, chains, rails |
| Variant configuration | Brush Roller Glass: roller, spiral construction with Nylon PA fill for conveyor and production-line cleaning on belts, rollers, chains, rails. |
Application Areas
Brush Roller Glass is primarily mapped to Glass Surface Cleaning. Before applying the brush to another process, verify the surface, the route for removed debris, and the final finish target.
- Brush Roller Glass is best suited to glass washing, rinsing, dust removal, and conveyor-line cleaning.
- The soft cylinder or segmented roller for glass washing and panel transport follows flat glass, coated glass, edges, conveyor rollers, and wash-machine contact zones while the fill displaces handling dust, particles, polishing residue, oil film, and wash residue.
- Use this configuration when the available access supports uniform low-pressure contact across glass, coated glass, or panel surfaces.
Selection Guidance
Structure fit
Match the roller and conveyor brush geometry to belts, rollers, and chains, the available access, and powered operation. Confirm Brush head diameter 100–250 mm and Brush head length 300–2000 mm against the complete working envelope before finalizing the brush.
Contact material
Choose from Nylon PA according to the behavior of powder, crumbs, and fibers, the surface sensitivity, and any wet, chemical, temperature, or hygiene requirements. Stiffness is not decided by the material name alone. Filament diameter, free trim length, and density also matter.
When to use another solution
For Brush Roller Glass, use another cleaning method when powder, crumbs, and fibers cannot be released by controlled filament contact, when belts, rollers, and chains cannot tolerate the selected contact material, or when the access path prevents safe engagement and residue removal.
Customization Options
| Brush Head Diameter (mm) | 100–250 |
|---|---|
| Brush Head Length (mm) | 300–2000 |
| Handle Length (mm) | Not Applicable (No separate handle in this product configuration) |
| Handle Grip Diameter (mm) | Not Applicable (No explicit grip or handle-diameter dimension in the product specification) |
| Bristle Material | Nylon PA |
| Handle Material | 304 Stainless Steel |
| Mounting / Interface | Shaft-Mounted / Quick-Change Coupling |
| Grip Style | Not Applicable (Machine-Mounted Brush) |
| Color | Custom PANTONE Color ([Industry Reference Range]) |
| Logo Process | Laser Engraving / Screen Printing / Pad Printing ([Industry Reference Range]) |
| Surface Treatment | Smooth / Textured / Overmolded / Coated (Depending on Substrate; [Industry Reference Range]) |
Frequently Asked Questions
How should Brush Roller Glass be selected?
Start with glass washing, rinsing, dust removal, and conveyor-line cleaning, flat glass, coated glass, edges, conveyor rollers, and wash-machine contact zones, and handling dust, particles, polishing residue, oil film, and wash residue. Then set Working width, Brush diameter, and Trim length, choose the fill from the material and residue table, and match the mounting interface and operating condition.
Which dimensions define Brush Roller Glass?
The primary dimensions are Working width (300–2000 mm), Brush diameter (100–250 mm), and Trim length (20–40 mm). Also provide the minimum clearance, working envelope, trim or engagement, and the existing holder, shaft, stem, thread, or handle.
Which filament or contact material is used for Brush Roller Glass?
The primary options are Nylon PA. The final choice follows surface sensitivity, residue adhesion, wet or dry use, temperature, chemicals, conductivity, and required cutting action.
When is Brush Roller Glass not the best cleaning method?
Brush Roller Glass is not the first choice for PVA sponge, microfiber, air knife, or deionized-water rinse for final particle and water removal.
What information is required to quote Brush Roller Glass?
Send the part or machine drawing, photos of flat glass, coated glass, edges, conveyor rollers, and wash-machine contact zones, Working width, Brush diameter, Trim length, and Nylon filament diameter, the residue description, wet or dry conditions, motion or use method, temperature, preferred Nylon PA, quantity, and the existing interface or sample.
RELATED BRUSH RESOURCES
Recommended Reading & Related Brush Resources
Custom Roller and Conveyor Brushes
Choose a roller or conveyor brush when a cylindrical brush must clean, wipe, guide,…
Explore this brush type
Glass Surface Cleaning
For Glass Surface Cleaning, the brush must reach the working area, disturb or collect…
Review application guidance
Dust Removal
For Dust Removal, the brush must reach the working area, disturb or collect loose…
Review application guidance
Nylon PA
Nylon PA is selected from its stiffness, recovery, wear, wet-service, chemical, and temperature behavior.
Compare material considerationsCustom Manufacturing RFQ
Upload the Brush Drawing, Product Photo or Sample Details
To quote this brush accurately, send the size, material, cleaning target, residue, quantity, and any available drawing or sample photo.
Custom Brush RFQ
Send Your Brush Project
Upload a drawing, product photo, or sample photo and provide the core dimensions and cleaning conditions.