Material
Non-woven Abrasive Fiber
Non-woven Abrasive Fiber is selected from its stiffness, recovery, wear, wet-service, chemical, and temperature behavior. Material name alone is not enough to set stiffness; we also need filament diameter, free trim, density, grade, and working conditions.
Material Overview
Non-woven Abrasive Fiber is a bonded abrasive web used as brush fill or a cleaning-contact element.
In a finished brush, Non-woven Abrasive Fiber does not create a fixed stiffness by itself. The final contact depends on filament diameter, free trim, density, tuft pattern, and interference; moisture, heat, and chemicals can change the response.
Material Properties
| Available forms | Disc, wheel, flap or block forms; fine to coarse grades |
|---|---|
| Temperature range | -20–120°C |
| Stiffness | Soft-conforming to firm according to density and grit |
Brush Applications
For Non-woven Abrasive Fiber, directly related brush structures include Wheel Brushes, Floor Scrubber Sweeper Brushes, Roller and Conveyor Brushes, and Tube & Pipe Bore Brushes. Applications related to Non-woven Abrasive Fiber include Ceramic Glaze Line & Tile Brush Use, Polishing, Surface Finishing, and Deburring & Edge Breaking.
Specification and Customization
Material form
Non-Woven Web / Disc / Wheel
Common forms
Disc, wheel, flap or block forms; fine to coarse grades
Grade
Abrasive mineral and density grade specified separately
Reference standard
ISO 6344 series
Limitations and Alternatives
Not suitable for dimensional stock removal or narrow deep bores without a supported carrier
Continue Exploring
Recommended Reading & Related Brush Resources
Custom Wheel Brushes
Choose a wheel brush when a rotating narrow face or edge must clean profiles,…
Explore this brush type
Custom Floor Scrubber Sweeper Brushes
Choose this brush type when a floor machine needs a disc, roller, main broom,…
Explore this brush type
Custom Roller and Conveyor Brushes
Choose a roller or conveyor brush when a cylindrical brush must clean, wipe, guide,…
Explore this brush type
Custom Tube & Pipe Bore Brushes
Choose a tube, pipe, or bore brush when the working surface is inside a…
Explore this brush type
Ceramic Glaze Line & Tile Brush Use
Ceramic Glaze Line & Tile Brush Use is a process-use page rather than a…
Review application guidance
Polishing
Polishing is a process-use page rather than a general cleaning category.
Review application guidance
Surface Finishing
Surface Finishing is a process-use page rather than a general cleaning category.
Review application guidance
Deburring & Edge Breaking
Deburring & Edge Breaking is a process-use page rather than a general cleaning category.
Review application guidance
Tile Grout Cleaning
For Tile Grout Cleaning, the brush must reach the working area, disturb or collect…
Review application guidance
Household Dish, Teapot & Kitchen Detail Cleaning
For Household Dish, Teapot & Kitchen Detail Cleaning, the brush must reach the working…
Review application guidanceCustom Manufacturing RFQ
Discuss This Material
Share the working surface, residue, dimensions, material direction, interface, quantity and drawing or sample photo.
Custom Brush RFQ
Request a Custom Cleaning Brush Quote
Upload a drawing, product photo, or sample photo and provide the core dimensions and cleaning conditions.