Custom Cleaning Brush
Roller Brush Glass Conveyor
Roller Brush Glass Conveyor provides controlled brush contact for glass and coated-panel cleaning across flat glass, coated sheets, and edges. Working width, brush geometry, mounting, and fill are set around the machine path and the way dust, glass fines, and polishing slurry must be released or carried away.
Product Features
Soft nylon bristles clean and support glass during conveying — The roller removes loose dust while guiding panels through the line.
Uniform cylindrical contact reduces point loading — Even filament distribution supports wide sheets without hard edges.
Fine trim limits marking on coated and uncoated glass — Bristle diameter and engagement can be selected for surface sensitivity.
Straight or spiral tufting manages dust movement — The pattern can clean uniformly or direct particles away from the panel path.
Balanced core and shaft ends support smooth transport — Concentric construction helps reduce vibration around fragile panels.
Made to the glass conveyor — Roller diameter, face width, nylon grade, trim, pattern, core, shaft ends, and spacing can be customized.
Product Overview
Roller Brush Glass Conveyor is used where repeatable contact is needed across flat glass, coated sheets, and edges rather than isolated hand cleaning. The active brush face clears dust, glass fines, and polishing slurry while the holder, shaft, plate, or hub stays outside the interference path and supports the required working width. The brush must maintain even low-pressure contact without trapping abrasive debris.
Key dimensions start with Brush head diameter 100–250 mm and Brush head length 300–2000 mm. The brush uses a roller and conveyor structure to maintain contact along the required working width. The specified interface is shaft-mounted / quick-change coupling. Nylon PA are the principal material directions in the current specification. The machine connection and working speed must come from the customer equipment specification rather than a default brush value.
Technical Specifications
| Working width | 300–2000 mm |
|---|---|
| Brush diameter | 100–250 mm |
| Trim length | 20–40 mm |
| Nylon filament diameter | 0.05–0.25 mm |
| Core or shaft | Machine-specific bore, key, or through-shaft |
| Helix | Straight row, helical, or segmented build |
| Contact setting | Use 1–5 mm engagement, low runout, and full-width support to avoid bands or edge loading. |
| Surface load | 0.5–3 N/cm² for controlled low-pressure contact |
| Fill materials | Nylon PA |
| Cleaning zone | glass and coated-panel cleaning |
| Contact surface | flat glass, coated sheets, edges, conveyor supports, and panel surfaces |
| Residue class | dust, glass fines, polishing slurry, oil film |
| Access and motion | the brush must maintain even low-pressure contact without trapping abrasive debris |
| Cleaning duty | glass, coated-panel cleaning on flat glass, coated sheets, edges, conveyor supports |
| Variant configuration | Roller Brush Glass Conveyor: roller, spiral construction with Nylon PA fill for glass and coated-panel cleaning on flat glass, coated sheets, edges, conveyor supports. |
Application Areas
Roller Brush Glass Conveyor is primarily mapped to Conveyor Belt Cleaning. For a different application, first confirm the surface, where the loosened debris will go, and the finish you need.
- Roller Brush Glass Conveyor is best suited to glass washing, rinsing, dust removal, and conveyor-line cleaning.
- The soft cylinder or segmented roller for glass washing and panel transport follows flat glass, coated glass, edges, conveyor rollers, and wash-machine contact zones while the fill displaces handling dust, particles, polishing residue, oil film, and wash residue.
- Use this configuration when the available access supports uniform low-pressure contact across glass, coated glass, or panel surfaces.
Selection Guidance
Structure fit
Match the roller and conveyor brush geometry to flat glass, coated sheets, and edges, the available access, and powered operation. Confirm Brush head diameter 100–250 mm and Brush head length 300–2000 mm against the complete working envelope before finalizing the brush.
Contact material
Choose from Nylon PA according to the behavior of dust, glass fines, and polishing slurry, the surface sensitivity, and any wet, chemical, temperature, or hygiene requirements. The same material can feel very different depending on filament diameter, free trim, and fill density.
When to use another solution
For Roller Brush Glass Conveyor, use another cleaning method when dust, glass fines, and polishing slurry cannot be released by controlled filament contact, when flat glass, coated sheets, and edges cannot tolerate the selected contact material, or when the access path prevents safe engagement and residue removal.
Customization Options
| Brush Head Diameter (mm) | 100–250 |
|---|---|
| Brush Head Length (mm) | 300–2000 |
| Handle Length (mm) | Not Applicable (No separate handle in this product configuration) |
| Handle Grip Diameter (mm) | Not Applicable (No explicit grip or handle-diameter dimension in the product specification) |
| Bristle Material | Nylon PA |
| Handle Material | 304 Stainless Steel |
| Mounting / Interface | Shaft-Mounted / Quick-Change Coupling |
| Grip Style | Not Applicable (Machine-Mounted Brush) |
| Color | Custom PANTONE Color ([Industry Reference Range]) |
| Logo Process | Laser Engraving / Screen Printing / Pad Printing ([Industry Reference Range]) |
| Surface Treatment | Smooth / Textured / Overmolded / Coated (Depending on Substrate; [Industry Reference Range]) |
Frequently Asked Questions
How should Roller Brush Glass Conveyor be selected?
Start with glass washing, rinsing, dust removal, and conveyor-line cleaning, flat glass, coated glass, edges, conveyor rollers, and wash-machine contact zones, and handling dust, particles, polishing residue, oil film, and wash residue. Then set Working width, Brush diameter, and Trim length, choose the fill from the material and residue table, and match the mounting interface and operating condition.
Which dimensions define Roller Brush Glass Conveyor?
The primary dimensions are Working width (300–2000 mm), Brush diameter (100–250 mm), and Trim length (20–40 mm). Also provide the minimum clearance, working envelope, trim or engagement, and the existing holder, shaft, stem, thread, or handle.
Which filament or contact material is used for Roller Brush Glass Conveyor?
The primary options are Nylon PA. The final choice follows surface sensitivity, residue adhesion, wet or dry use, temperature, chemicals, conductivity, and required cutting action.
When is Roller Brush Glass Conveyor not the best cleaning method?
Roller Brush Glass Conveyor is not the first choice for PVA sponge, microfiber, air knife, or deionized-water rinse for final particle and water removal.
What information is required to quote Roller Brush Glass Conveyor?
Send the part or machine drawing, photos of flat glass, coated glass, edges, conveyor rollers, and wash-machine contact zones, Working width, Brush diameter, Trim length, and Nylon filament diameter, the residue description, wet or dry conditions, motion or use method, temperature, preferred Nylon PA, quantity, and the existing interface or sample.
RELATED BRUSH RESOURCES
Recommended Reading & Related Brush Resources
Custom Roller and Conveyor Brushes
Choose a roller or conveyor brush when a cylindrical brush must clean, wipe, guide,…
Explore this brush type
Conveyor Belt Cleaning
For Conveyor Belt Cleaning, the brush must reach the working area, disturb or collect…
Review application guidance
Dust Removal
For Dust Removal, the brush must reach the working area, disturb or collect loose…
Review application guidance
Nylon PA
Nylon PA is selected from its stiffness, recovery, wear, wet-service, chemical, and temperature behavior.
Compare material considerationsCustom Manufacturing RFQ
Upload the Brush Drawing, Product Photo or Sample Details
An accurate custom quote starts with the dimensions, working surface, residue, material choice, connection, quantity, and reference files.
Custom Brush RFQ
Send Your Brush Project
Upload a drawing, product photo, or sample photo and provide the core dimensions and cleaning conditions.