Custom Cleaning Brush
Strip Brush Plastic
Strip Brush Plastic provides controlled brush contact for strip plastic cleaning and maintenance across strip plastic contact surfaces, adjacent edges, and mounting features. Working width, brush geometry, mounting, and fill are set around the machine path and the way air, dust, and mist must be released or carried away.
Product Features
Nonmetallic strip construction — Plastic bases and synthetic filament suit corrosion-sensitive and lightweight applications.
Continuous cleaning or sealing edge — The brush wipes, guides, blocks dust, and closes gaps.
Nylon filament for wet service — Bristle diameter and trim can be selected for moisture, detergent exposure, and the sensitivity of the contacted surface.
Flexible formed profiles — Plastic strips can be straight, curved, or adapted to molded components.
Low marking and low weight — Suitable for plastic parts, glass, and finished surfaces.
Made to the application — Length, trim, base, filament, color, mounting, and profile can be customized.
Product Overview
Strip Brush Plastic is used where repeatable contact is needed across strip plastic contact surfaces, adjacent edges, and mounting features rather than isolated hand cleaning. The active brush face clears air, dust, and mist while the holder, shaft, plate, or hub stays outside the interference path and supports the required working width. The strip plastic working face must reach the complete residue path while the holder remains clear of the part.
Key dimensions start with Brush head length 100–3000 mm. The structural layout follows the strip seal brush category. The specified interface is fixed / screw-fastened / adhesive-bonded. Nylon PA are the principal material directions in the current specification. The holder and installed engagement should keep the working edge in contact without excessive compression or drag.
Technical Specifications
| Custom strip length | 100–3000 mm |
|---|---|
| trim height | 12.7–152.4 mm |
| Channel width | 3.2–14.3 mm |
| Filament diameter | 0.10–1.27 mm |
| Working compression | 5–25% of trim height |
| Holder | Straight channel, aluminum carrier, angle holder, or custom profile |
| Contact setting | Use 5–15% trim compression for wiping and dust control; 10–25% for sealing without crushing the fill. |
| Fill materials | Nylon PA |
| Cleaning zone | strip plastic cleaning and maintenance |
| Contact surface | strip plastic contact surfaces, adjacent edges, mounting features, and working zones |
| Residue class | air, dust, mist, light |
| Access and motion | the strip plastic working face must reach the complete residue path while the holder remains clear of the part |
| Cleaning duty | strip plastic cleaning, maintenance on strip plastic contact surfaces, adjacent edges, mounting features, working zones |
| Variant configuration | Strip Brush Plastic: strip, channel strip construction with Nylon PA fill for strip plastic cleaning and maintenance on strip plastic contact surfaces, adjacent edges, mounting features, and working zones. |
Application Areas
Strip Brush Plastic is primarily mapped to Door Gap Sealing. Before switching to a new application, make sure the surface, debris path, and finish requirement are clearly defined.
- Strip Brush Plastic is best suited to sealing, guiding, wiping, dust control, cable entry, door gap, machine guard, conveyor edge, and process-line contact.
- The straight, formed, coiled, holder-mounted, or conductive strip brush follows gaps, doors, cable openings, machine rails, conveyors, furnace openings, screens, and equipment edges while the fill displaces air, dust, mist, light, noise, insects, granules, oil, residue, and loose debris.
- Use this configuration when the available access supports continuous line contact for wiping, sealing, guiding, cleaning, or blocking gaps.
Selection Guidance
Structure fit
Match the strip seal brush geometry to strip plastic contact surfaces, adjacent edges, and mounting features, the available access, and fixed contact. Confirm Brush head length 100–3000 mm against the complete working envelope before finalizing the brush.
Contact material
Choose from Nylon PA according to the behavior of air, dust, and mist, the surface sensitivity, and any wet, chemical, temperature, or hygiene requirements. The same material can feel very different depending on filament diameter, free trim, and fill density.
When to use another solution
For Strip Brush Plastic, use another cleaning method when air, dust, and mist cannot be released by controlled filament contact, when strip plastic contact surfaces, adjacent edges, and mounting features cannot tolerate the selected contact material, or when the access path prevents safe engagement and residue removal.
Customization Options
| Brush Head Diameter (mm) | Not Applicable (Linear strip or seal profile) |
|---|---|
| Brush Head Length (mm) | 100–3000 |
| Handle Length (mm) | Not Applicable (No separate handle in this product configuration) |
| Handle Grip Diameter (mm) | Not Applicable (No explicit grip or handle-diameter dimension in the product specification) |
| Bristle Material | Nylon PA |
| Handle Material | 6063 Aluminum Alloy |
| Mounting / Interface | Fixed / Screw-Fastened / Adhesive-Bonded |
| Grip Style | Not Applicable (Strip Brush) |
| Color | Custom PANTONE Color ([Industry Reference Range]) |
| Logo Process | Laser Engraving / Screen Printing / Pad Printing ([Industry Reference Range]) |
| Surface Treatment | Smooth / Textured / Overmolded / Coated (Depending on Substrate; [Industry Reference Range]) |
Frequently Asked Questions
How should Strip Brush Plastic be selected?
Start with sealing, guiding, wiping, dust control, cable entry, door gap, machine guard, conveyor edge, and process-line contact, gaps, doors, cable openings, machine rails, conveyors, furnace openings, screens, and equipment edges, and air, dust, mist, light, noise, insects, granules, oil, residue, and loose debris. Then set Custom strip length, trim height, and Channel width, choose the fill from the material and residue table, and match the mounting interface and operating condition.
Which dimensions define Strip Brush Plastic?
The primary dimensions are Custom strip length (100–3000 mm), trim height (12.7–152.4 mm), and Channel width (3.2–14.3 mm). Also provide the minimum clearance, working envelope, trim or engagement, and the existing holder, shaft, stem, thread, or handle.
Which filament or contact material is used for Strip Brush Plastic?
The primary options are Nylon PA. The final choice follows surface sensitivity, residue adhesion, wet or dry use, temperature, chemicals, conductivity, and required cutting action.
When is Strip Brush Plastic not the best cleaning method?
Strip Brush Plastic is not the first choice for rubber lips, foam, labyrinth seals, air curtains, or rigid scrapers when pressure sealing or liquid containment is required.
What information is required to quote Strip Brush Plastic?
Send the part or machine drawing, photos of gaps, doors, cable openings, machine rails, conveyors, furnace openings, screens, and equipment edges, Custom strip length, trim height, Channel width, and Filament diameter, the residue description, wet or dry conditions, motion or use method, temperature, preferred Nylon PA, quantity, and the existing interface or sample.
RELATED BRUSH RESOURCES
Recommended Reading & Related Brush Resources
Custom Strip Seal Brushes
Choose a strip seal brush when a continuous line of filament must seal, wipe,…
Explore this brush type
Door Gap Sealing
Door Gap Sealing is a process-use page rather than a general cleaning category.
Review application guidance
Rail Transit Platform Door & Noise Control Sealing
Rail Transit Platform Door & Noise Control Sealing is a process-use page rather than…
Review application guidance
Nylon PA
Nylon PA is selected from its stiffness, recovery, wear, wet-service, chemical, and temperature behavior.
Compare material considerationsCustom Manufacturing RFQ
Upload the Brush Drawing, Product Photo or Sample Details
For an accurate quotation, please provide the main dimensions, material preference, working surface, residue, quantity, and a drawing or photo.
Custom Brush RFQ
Send Your Brush Project
Upload a drawing, product photo, or sample photo and provide the core dimensions and cleaning conditions.