Custom Cleaning Brush
200x1600mm SS316 Furnace Roller Brush
200x1600mm SS316 Furnace Roller Brush provides controlled brush contact for Industrial Machine Cleaning across machine housings, components, and recesses. Working width, brush geometry, mounting, and fill are set around the machine path and the way chips, oil, and dust must be released or carried away.
Product Features
200 mm diameter and 1600 mm face width provide robust rotary cleaning in furnace-line equipment.
SS316 wire offers corrosion and heat resistance — Suitable for scale, oxide, and process residue.
Crimped or straight wire layouts — Contact can be balanced between flexibility and cutting action.
Heavy-duty shafted construction — The roller supports industrial temperatures and loads.
Replaceable rings or segments — Worn working sections can be serviced.
SS316 wire gauge, trim, density, shaft ends, bearings, and operating temperature can be customized.
Product Overview
200x1600mm SS316 Furnace Roller Brush is used where repeatable contact is needed across machine housings, components, and recesses rather than isolated hand cleaning. The active brush face clears chips, oil, and dust while the holder, shaft, plate, or hub stays outside the interference path and supports the required working width. The brush must cover the moving path, accommodate tracking, and discharge residue away from the product zone.
Key dimensions start with Brush head diameter 200 mm, Brush head length 1600 mm, and Handle length 0 mm. The product follows a roller-brush layout suited to continuous contact across the working width. The specified interface is quick-change coupling. AISI 316 Stainless Steel Wire are the principal material directions in the current specification. The machine connection and working speed must come from the customer equipment specification rather than a default brush value.
Technical Specifications
| Head diameter | 200 mm |
|---|---|
| Head shape | Round |
| Head length | 1600 mm |
| Bristle material | SS316 |
| Handle/base material | AISI 316 Stainless Steel |
| Handle length | 0 mm |
| Grip diameter | 0 mm |
| Connection | Quick-Change Coupling |
| Cleaning method | Dry Brushing |
| Applicable media | No Added Medium |
Application Areas
200x1600mm SS316 Furnace Roller Brush is primarily mapped to Industrial Machine Cleaning. If the brush will be used on a different job, confirm the surface, debris discharge path, and acceptable finish first.
- 200x1600mm SS316 Furnace Roller Brush is configured for Industrial Machine Cleaning.
- The active brush contact follows machine housings, components, recesses, guides, tooling, and accessible working surfaces while the fill displaces chips, oil, dust, process residue, scale, and loose contamination.
- Use this configuration when the dimensions, access path, mounting interface, operating motion, chemistry, and allowable surface contact match the stated project conditions.
Selection Guidance
Structure fit
Match the roller and conveyor brush geometry to machine housings, components, and recesses, the available access, and powered operation. Confirm Brush head diameter 200 mm, Brush head length 1600 mm, and Handle length 0 mm against the complete working envelope before finalizing the brush.
Contact material
Choose from AISI 316 Stainless Steel Wire according to the behavior of chips, oil, and dust, the surface sensitivity, and any wet, chemical, temperature, or hygiene requirements. Do not choose stiffness from the material name alone. Filament size, free trim, and density control the final contact.
When to use another solution
For 200x1600mm SS316 Furnace Roller Brush, use another cleaning method when chips, oil, and dust cannot be released by controlled filament contact, when machine housings, components, and recesses cannot tolerate the selected contact material, or when the access path prevents safe engagement and residue removal.
Customization Options
| Brush Head Diameter (mm) | 200 |
|---|---|
| Brush Head Length (mm) | 1600 [Industry Reference Range; Legacy Source] |
| Handle Length (mm) | 0 |
| Handle Grip Diameter (mm) | 0 |
| Bristle Material | AISI 316 Stainless Steel Wire |
| Handle Material | 316 Stainless Steel |
| Mounting / Interface | Quick-Change Coupling |
| Grip Style | No Handle (Equipment-Mounted) |
| Color | Natural Metal |
| Logo Process | Laser Engraving |
| Surface Treatment | Pickled and Passivated |
RELATED BRUSH RESOURCES
Recommended Reading & Related Brush Resources
Custom Roller and Conveyor Brushes
Choose a roller or conveyor brush when a cylindrical brush must clean, wipe, guide,…
Explore this brush type
Industrial Machine Cleaning
For Industrial Machine Cleaning, the brush must reach the working area, disturb or collect…
Review application guidance
Dust Removal
For Dust Removal, the brush must reach the working area, disturb or collect loose…
Review application guidance
AISI 316 Stainless Steel Wire
AISI 316 Stainless Steel Wire is selected from its stiffness, recovery, wear, wet-service, chemical,…
Compare material considerationsCustom Manufacturing RFQ
Upload the Brush Drawing, Product Photo or Sample Details
For an accurate quotation, please provide the main dimensions, material preference, working surface, residue, quantity, and a drawing or photo.
Custom Brush RFQ
Send Your Brush Project
Upload a drawing, product photo, or sample photo and provide the core dimensions and cleaning conditions.