Custom Cleaning Brush
350mm Silicone Food Transfer Disc Brush
350mm Silicone Food Transfer Disc Brush provides controlled brush contact for Beverage Equipment Cleaning across beverage tanks, star wheels, and guides. Working width, brush geometry, mounting, and fill are set around the machine path and the way syrup, product drips, and label fibers must be released or carried away.
Product Features
350 mm molded silicone disc supports gentle food transfer and cleaning — Flexible fingers move product without rigid bristles.
Nonporous contact surface rinses easily — Silicone releases food residue.
Metal-free working face — The disc can reduce hard contact and loose filament concerns.
Flexible finger profile conforms to product variation — Hardness can be tuned.
Food-process color and detection options can be considered — Material formulation can match the line.
Silicone hardness, finger geometry, disc core, hub, color, and mounting can be customized.
Product Overview
350mm Silicone Food Transfer Disc Brush is used where repeatable contact is needed across beverage tanks, star wheels, and guides rather than isolated hand cleaning. The active brush face clears syrup, product drips, and label fibers while the holder, shaft, plate, or hub stays outside the interference path and supports the required working width. The brush must fit around moving containers without interfering with timing or product flow.
Key dimensions start with Brush head diameter 350 mm, Brush head length 60 mm, and Handle length 0 mm. The structural layout follows the disc brush category. The specified interface is quick-change coupling. Silicone are the principal material directions in the current specification. The machine connection and working speed must come from the customer equipment specification rather than a default brush value.
Technical Specifications
| Head diameter | 350 mm |
|---|---|
| Head shape | Round |
| Head length | 60 mm |
| Bristle material | SILICONE |
| Handle/base material | Polypropylene (PP) |
| Handle length | 0 mm |
| Grip diameter | 0 mm |
| Connection | Quick-Change Coupling |
| Cleaning method | Wet Brushing / Steam Cleaning |
| Applicable media | Water / Neutral Detergent / Alkaline Cleaner |
Application Areas
350mm Silicone Food Transfer Disc Brush is primarily mapped to Beverage Equipment Cleaning. Before switching to a new application, make sure the surface, debris path, and finish requirement are clearly defined.
- 350mm Silicone Food Transfer Disc Brush is configured for Beverage Equipment Cleaning.
- The active brush contact follows beverage tanks, star wheels, guides, neck rails, nozzles, valves, and transfer points while the fill displaces syrup, product drips, label fibers, cap dust, yeast film, and washdown residue.
- Use this configuration when the dimensions, access path, mounting interface, operating motion, chemistry, and allowable surface contact match the stated project conditions.
Selection Guidance
Structure fit
Match the disc brush geometry to beverage tanks, star wheels, and guides, the available access, and powered operation. Confirm Brush head diameter 350 mm, Brush head length 60 mm, and Handle length 0 mm against the complete working envelope before finalizing the brush.
Contact material
Choose from Silicone according to the behavior of syrup, product drips, and label fibers, the surface sensitivity, and any wet, chemical, temperature, or hygiene requirements. To set the right stiffness, confirm the filament diameter, free trim, and density as well as the material.
When to use another solution
For 350mm Silicone Food Transfer Disc Brush, use another cleaning method when syrup, product drips, and label fibers cannot be released by controlled filament contact, when beverage tanks, star wheels, and guides cannot tolerate the selected contact material, or when the access path prevents safe engagement and residue removal.
Customization Options
| Brush Head Diameter (mm) | 350 |
|---|---|
| Brush Head Length (mm) | 60 |
| Handle Length (mm) | 0 |
| Handle Grip Diameter (mm) | 0 |
| Bristle Material | Silicone |
| Handle Material | Polypropylene PP |
| Mounting / Interface | Quick-Change Coupling |
| Grip Style | No Handle (Equipment-Mounted) |
| Color | Red |
| Logo Process | In-Mold Labeling |
| Surface Treatment | Textured |
RELATED BRUSH RESOURCES
Recommended Reading & Related Brush Resources
Custom Disc Brushes
Choose a disc brush when a circular face must scrub, wipe, polish, sweep, or…
Explore this brush type
Beverage Equipment Cleaning
For Beverage Equipment Cleaning, the brush must reach the working area, disturb or collect…
Review application guidance
Food Equipment Cleaning
For Food Equipment Cleaning, the brush must reach the working area, disturb or collect…
Review application guidance
Silicone
Silicone is selected from its stiffness, recovery, wear, wet-service, chemical, and temperature behavior. Do…
Compare material considerationsCustom Manufacturing RFQ
Upload the Brush Drawing, Product Photo or Sample Details
An accurate custom quote starts with the dimensions, working surface, residue, material choice, connection, quantity, and reference files.
Custom Brush RFQ
Send Your Brush Project
Upload a drawing, product photo, or sample photo and provide the core dimensions and cleaning conditions.