Custom Cleaning Brush
400mm EPDM Wiper Disc Brush
400mm EPDM Wiper Disc Brush provides controlled brush contact for Conveyor Belt Cleaning across belt faces, return runs, and edges. Working width, brush geometry, mounting, and fill are set around the machine path and the way water, oil film, and fines must be released or carried away.
Product Features
400 mm EPDM disc provides compliant wiping contact — Rubber elements remove liquid, dust, and soft residue.
EPDM resists water, weather, and many cleaning chemicals — Suitable for wet and outdoor service.
Non-shedding molded profile — The working edge avoids loose bristles.
Finger, blade, or segmented geometry — Wiping action can be tuned to the surface.
Hub and drive interface can fit rotary equipment — The disc is machine-mountable.
EPDM hardness, profile, disc core, hub, trim, and operating environment can be customized.
Product Overview
400mm EPDM Wiper Disc Brush is used where repeatable contact is needed across belt faces, return runs, and edges rather than isolated hand cleaning. The active brush face clears water, oil film, and fines while the holder, shaft, plate, or hub stays outside the interference path and supports the required working width. Diameter, arbor or plate interface, equipment input, filament projection, and contact width must match the powered or passive rotary setup.
Key dimensions start with Brush head diameter 400 mm, Brush head length 50 mm, and Handle length 0 mm. The structural layout follows the disc brush category. The specified interface is quick-change coupling. EPDM Rubber Brush Blade are the principal material directions in the current specification. Please send the equipment interface and operating conditions, including speed, so the brush can be matched to the machine.
Technical Specifications
| Head diameter | 400 mm |
|---|---|
| Head shape | Round |
| Head length | 50 mm |
| Bristle material | EPDM |
| Handle/base material | Polypropylene (PP) |
| Handle length | 0 mm |
| Grip diameter | 0 mm |
| Connection | Quick-Change Coupling |
| Cleaning method | Wet Brushing |
| Applicable media | Water / Neutral Detergent / Oil |
Application Areas
400mm EPDM Wiper Disc Brush is primarily mapped to Conveyor Belt Cleaning. For a different application, first confirm the surface, where the loosened debris will go, and the finish you need.
- 400mm EPDM Wiper Disc Brush is configured for Conveyor Belt Cleaning.
- The active brush contact follows belt faces, return runs, edges, rollers, and discharge zones while the fill displaces water, oil film, fines, product residue, labels, and carryback.
- Use this configuration when the dimensions, access path, mounting interface, operating motion, chemistry, and allowable surface contact match the stated project conditions.
Selection Guidance
Structure fit
Match the disc brush geometry to belt faces, return runs, and edges, the available access, and powered operation. Confirm Brush head diameter 400 mm, Brush head length 50 mm, and Handle length 0 mm against the complete working envelope before finalizing the brush.
Contact material
Choose from EPDM Rubber Brush Blade according to the behavior of water, oil film, and fines, the surface sensitivity, and any wet, chemical, temperature, or hygiene requirements. Material is only one part of stiffness; filament diameter, exposed length, and density must also be confirmed.
When to use another solution
For 400mm EPDM Wiper Disc Brush, use another cleaning method when water, oil film, and fines cannot be released by controlled filament contact, when belt faces, return runs, and edges cannot tolerate the selected contact material, or when the access path prevents safe engagement and residue removal.
Customization Options
| Brush Head Diameter (mm) | 400 |
|---|---|
| Brush Head Length (mm) | 50 |
| Handle Length (mm) | 0 |
| Handle Grip Diameter (mm) | 0 |
| Bristle Material | EPDM Rubber Brush Blade |
| Handle Material | Polypropylene PP |
| Mounting / Interface | Quick-Change Coupling |
| Grip Style | No Handle (Equipment-Mounted) |
| Color | Black |
| Logo Process | In-Mold Labeling |
| Surface Treatment | Textured |
RELATED BRUSH RESOURCES
Recommended Reading & Related Brush Resources
Custom Disc Brushes
Choose a disc brush when a circular face must scrub, wipe, polish, sweep, or…
Explore this brush type
Conveyor Belt Cleaning
For Conveyor Belt Cleaning, the brush must reach the working area, disturb or collect…
Review application guidance
Conveyor Bulk Material Cleaning
For Conveyor Bulk Material Cleaning, the brush must reach the working area, disturb or…
Review application guidance
EPDM Rubber Brush Blade
EPDM Rubber Brush Blade is selected from its stiffness, recovery, wear, wet-service, chemical, and…
Compare material considerationsCustom Manufacturing RFQ
Upload the Brush Drawing, Product Photo or Sample Details
To prepare the correct quotation, provide the dimensions, cleaning task, residue, material, mounting details, quantity, and a drawing or photo.
Custom Brush RFQ
Send Your Brush Project
Upload a drawing, product photo, or sample photo and provide the core dimensions and cleaning conditions.