Custom Cleaning Brush
Gutter Broom
Gutter Broom provides controlled brush contact for floor and pavement machine cleaning across concrete, tile, and epoxy. Working width, brush geometry, mounting, and fill are set around the machine path and the way dust, sand, and mud must be released or carried away.
Product Features
Pulls debris from curb and gutter edges — Angled disc bristles reach where the main broom cannot.
Strong outward contact — Long trim works along curbs, drains, and uneven road margins.
Mixed filament options — Polypropylene handles general litter, while wire cuts compacted dirt and weeds.
Heavy-duty hub fits sweeper drives — Bolt patterns and center interfaces can match municipal equipment.
Replaceable wear component — The broom can be changed quickly during service.
Matched to the curb-side position — Diameter, trim angle, wire/PP mix, tuft layout, hub, and rotation direction can be built for the sweeper model.
Product Overview
Gutter Broom is used where repeatable contact is needed across concrete, tile, and epoxy rather than isolated hand cleaning. The active brush face clears dust, sand, and mud while the holder, shaft, plate, or hub stays outside the interference path and supports the required working width. Brush diameter, drive pattern, working width, and floor pressure must match the machine and surface.
Key dimensions start with Brush head diameter 700–1800 mm and Brush head length 700–1800 mm. The structural layout follows the road sweeper brooms category. The specified interface is quick-change coupling / bolted. Polypropylene PP and Nylon PA are the principal material directions in the current specification. The brush should be specified from the real machine connection and operating speed, not from a generic RPM value.
Technical Specifications
| Main broom working width | 700–1800 mm |
|---|---|
| Main broom diameter | 320–900 mm |
| Wafer or section width | 25–100 mm |
| Filament diameter | 0.50–2.50 mm |
| Core interface | Machine-specific drive lug, key, spline, tube, or wafer stack |
| Fill pattern | Chevron, window, sand wedge, patrol, full fill, or mixed wafer |
| Contact setting | Set 25–75 mm ground contact pattern; excessive flattening increases wear without improving pickup. |
| Fill materials | Polypropylene PP and Nylon PA |
| Cleaning zone | floor and pavement machine cleaning |
| Contact surface | concrete, tile, epoxy, asphalt, curb edges, stairs, and textured floors |
| Residue class | dust, sand, mud, oil |
| Access and motion | brush diameter, drive pattern, working width, and floor pressure must match the machine and surface |
| Cleaning duty | floor, pavement machine cleaning on concrete, tile, epoxy, asphalt |
| Variant configuration | Gutter Broom: long handle, roller, side broom construction with Polypropylene PP, Nylon PA fill for floor and pavement machine cleaning on concrete, tile, epoxy, asphalt. |
Application Areas
Gutter Broom is primarily mapped to Gutter Cleaning. When adapting this brush to another job, confirm the workpiece surface, how debris will leave the area, and the required finish.
- Gutter Broom is best suited to road-sweeper main broom, cylindrical broom, and gutter-broom cleaning.
- The main broom, side broom, gutter broom, wafer, or strip segment follows road, yard, parking area, curb, gutter, and sweeper pickup path while the fill displaces sand, gravel, litter, leaves, dust, mud, and mixed outdoor debris.
- Use this configuration when the available access supports high-energy sweeping contact on roads, curbs, gutters, snow, and outdoor pavement.
Selection Guidance
Structure fit
Match the road sweeper brooms geometry to concrete, tile, and epoxy, the available access, and powered operation. Confirm Brush head diameter 700–1800 mm and Brush head length 700–1800 mm against the complete working envelope before finalizing the brush.
Contact material
Choose from Polypropylene PP and Nylon PA according to the behavior of dust, sand, and mud, the surface sensitivity, and any wet, chemical, temperature, or hygiene requirements. Choose stiffness by looking at filament size, free trim length, and density together with the material.
When to use another solution
For Gutter Broom, use another cleaning method when dust, sand, and mud cannot be released by controlled filament contact, when concrete, tile, and epoxy cannot tolerate the selected contact material, or when the access path prevents safe engagement and residue removal.
Customization Options
| Brush Head Diameter (mm) | 700–1800 [Industry Reference Range; Legacy Source] |
|---|---|
| Brush Head Length (mm) | 700–1800 [Industry Reference Range; Legacy Source] |
| Handle Length (mm) | Not Applicable (No separate handle in this product configuration) |
| Handle Grip Diameter (mm) | Not Applicable (No explicit grip or handle-diameter dimension in the product specification) |
| Bristle Material | Polypropylene PP, Nylon PA |
| Handle Material | Powder-Coated Carbon Steel |
| Mounting / Interface | Quick-Change Coupling / Bolted |
| Grip Style | Not Applicable (Machine Brush) |
| Color | Custom PANTONE Color ([Industry Reference Range]) |
| Logo Process | Laser Engraving / Screen Printing / Pad Printing ([Industry Reference Range]) |
| Surface Treatment | Smooth / Textured / Overmolded / Coated (Depending on Substrate; [Industry Reference Range]) |
Frequently Asked Questions
How should Gutter Broom be selected?
Start with road-sweeper main broom, cylindrical broom, and gutter-broom cleaning, road, yard, parking area, curb, gutter, and sweeper pickup path, and sand, gravel, litter, leaves, dust, mud, and mixed outdoor debris. Then set Main broom working width, Main broom diameter, and Wafer or section width, choose the fill from the material and residue table, and match the mounting interface and operating condition.
Which dimensions define Gutter Broom?
The primary dimensions are Main broom working width (700–1800 mm), Main broom diameter (320–900 mm), and Wafer or section width (25–100 mm). Also provide the minimum clearance, working envelope, trim or engagement, and the existing holder, shaft, stem, thread, or handle.
Which filament or contact material is used for Gutter Broom?
The primary options are Polypropylene PP and Nylon PA. The final choice follows surface sensitivity, residue adhesion, wet or dry use, temperature, chemicals, conductivity, and required cutting action.
When is Gutter Broom not the best cleaning method?
Gutter Broom is not the first choice for vacuum-only pickup, plow, pressure wash, or milling for fine airborne dust, packed ice, or bonded deposits.
What information is required to quote Gutter Broom?
Send the part or machine drawing, photos of road, yard, parking area, curb, gutter, and sweeper pickup path, Main broom working width, Main broom diameter, Wafer or section width, and Filament diameter, the residue description, wet or dry conditions, motion or use method, temperature, preferred Polypropylene PP and Nylon PA, quantity, and the existing interface or sample.
RELATED BRUSH RESOURCES
Recommended Reading & Related Brush Resources
Custom Road Sweeper Brooms
Choose a road sweeper broom when a machine must lift and direct litter, sand,…
Explore this brush type
Gutter Cleaning
For Gutter Cleaning, the brush must reach the working area, disturb or collect leaves…
Review application guidance
Tile Grout Cleaning
For Tile Grout Cleaning, the brush must reach the working area, disturb or collect…
Review application guidance
Polypropylene PP
Polypropylene PP is selected from its stiffness, recovery, wear, wet-service, chemical, and temperature behavior.
Compare material considerations
Nylon PA
Nylon PA is selected from its stiffness, recovery, wear, wet-service, chemical, and temperature behavior.
Compare material considerationsCustom Manufacturing RFQ
Upload the Brush Drawing, Product Photo or Sample Details
Please include the main sizes, application, residue, preferred material, interface, quantity, and any drawing or sample available.
Custom Brush RFQ
Send Your Brush Project
Upload a drawing, product photo, or sample photo and provide the core dimensions and cleaning conditions.