Custom Cleaning Brush
Main Broom
Main Broom provides controlled brush contact for floor and pavement machine cleaning across concrete, tile, and epoxy. Working width, brush geometry, mounting, and fill are set around the machine path and the way dust, sand, and mud must be released or carried away.
Product Features
Full-width cylindrical broom moves debris toward the sweeper hopper — The primary brush collects dust, grit, leaves, and litter across the machine path.
Chevron or spiral pattern directs material inward — Wafer or tuft arrangement supports consistent pickup and limits side discharge.
Polypropylene handles general road sweeping — Stiff resilient bristles move loose debris on common pavement surfaces.
Nylon option provides different recovery and wear behavior — Filament grade can be matched to surface texture and debris load.
Balanced core supports stable rotation and even ground contact — Correct assembly helps reduce vibration and uneven wear.
Made to the sweeper — Outside diameter, face width, PP/nylon fill, wafer or tuft pattern, core, drive interface, and engagement can be customized.
Product Overview
Main Broom is used where repeatable contact is needed across concrete, tile, and epoxy rather than isolated hand cleaning. The active brush face clears dust, sand, and mud while the holder, shaft, plate, or hub stays outside the interference path and supports the required working width. Brush diameter, drive pattern, working width, and floor pressure must match the machine and surface.
Key dimensions start with Brush head diameter 320–900 mm and Brush head length 700–1800 mm. The structural layout follows the road sweeper brooms category. The specified interface is quick-change coupling / bolted. Polypropylene PP and Nylon PA are the principal material directions in the current specification. Confirm the equipment model, shaft or hub interface, and actual operating speed; the brush does not use a universal speed rating.
Technical Specifications
| Main broom working width | 700–1800 mm |
|---|---|
| Main broom diameter | 320–900 mm |
| Wafer or section width | 25–100 mm |
| Filament diameter | 0.50–2.50 mm |
| Core interface | Machine-specific drive lug, key, spline, tube, or wafer stack |
| Fill pattern | Chevron, window, sand wedge, patrol, full fill, or mixed wafer |
| Contact setting | Set 25–75 mm ground contact pattern; excessive flattening increases wear without improving pickup. |
| Fill materials | Polypropylene PP and Nylon PA |
| Cleaning zone | floor and pavement machine cleaning |
| Contact surface | concrete, tile, epoxy, asphalt, curb edges, stairs, and textured floors |
| Residue class | dust, sand, mud, oil |
| Access and motion | brush diameter, drive pattern, working width, and floor pressure must match the machine and surface |
| Cleaning duty | floor, pavement machine cleaning on concrete, tile, epoxy, asphalt |
| Variant configuration | Main Broom: main broom, roller construction with Polypropylene PP, Nylon PA fill for floor and pavement machine cleaning on concrete, tile, epoxy, asphalt. |
Application Areas
Main Broom is primarily mapped to Road Sweeping. For a different application, first confirm the surface, where the loosened debris will go, and the finish you need.
- Main Broom is best suited to road-sweeper main broom, cylindrical broom, and gutter-broom cleaning.
- The main broom, side broom, gutter broom, wafer, or strip segment follows road, yard, parking area, curb, gutter, and sweeper pickup path while the fill displaces sand, gravel, litter, leaves, dust, mud, and mixed outdoor debris.
- Use this configuration when the available access supports high-energy sweeping contact on roads, curbs, gutters, snow, and outdoor pavement.
Selection Guidance
Structure fit
Match the road sweeper brooms geometry to concrete, tile, and epoxy, the available access, and powered operation. Confirm Brush head diameter 320–900 mm and Brush head length 700–1800 mm against the complete working envelope before finalizing the brush.
Contact material
Choose from Polypropylene PP and Nylon PA according to the behavior of dust, sand, and mud, the surface sensitivity, and any wet, chemical, temperature, or hygiene requirements. Material is only one part of stiffness; filament diameter, exposed length, and density must also be confirmed.
When to use another solution
For Main Broom, use another cleaning method when dust, sand, and mud cannot be released by controlled filament contact, when concrete, tile, and epoxy cannot tolerate the selected contact material, or when the access path prevents safe engagement and residue removal.
Customization Options
| Brush Head Diameter (mm) | 320–900 |
|---|---|
| Brush Head Length (mm) | 700–1800 |
| Handle Length (mm) | Not Applicable (No separate handle in this product configuration) |
| Handle Grip Diameter (mm) | Not Applicable (No explicit grip or handle-diameter dimension in the product specification) |
| Bristle Material | Polypropylene PP, Nylon PA |
| Handle Material | Powder-Coated Carbon Steel |
| Mounting / Interface | Quick-Change Coupling / Bolted |
| Grip Style | Not Applicable (Machine Brush) |
| Color | Custom PANTONE Color ([Industry Reference Range]) |
| Logo Process | Laser Engraving / Screen Printing / Pad Printing ([Industry Reference Range]) |
| Surface Treatment | Smooth / Textured / Overmolded / Coated (Depending on Substrate; [Industry Reference Range]) |
Frequently Asked Questions
How should Main Broom be selected?
Start with road-sweeper main broom, cylindrical broom, and gutter-broom cleaning, road, yard, parking area, curb, gutter, and sweeper pickup path, and sand, gravel, litter, leaves, dust, mud, and mixed outdoor debris. Then set Main broom working width, Main broom diameter, and Wafer or section width, choose the fill from the material and residue table, and match the mounting interface and operating condition.
Which dimensions define Main Broom?
The primary dimensions are Main broom working width (700–1800 mm), Main broom diameter (320–900 mm), and Wafer or section width (25–100 mm). Also provide the minimum clearance, working envelope, trim or engagement, and the existing holder, shaft, stem, thread, or handle.
Which filament or contact material is used for Main Broom?
The primary options are Polypropylene PP and Nylon PA. The final choice follows surface sensitivity, residue adhesion, wet or dry use, temperature, chemicals, conductivity, and required cutting action.
When is Main Broom not the best cleaning method?
Main Broom is not the first choice for vacuum-only pickup, plow, pressure wash, or milling for fine airborne dust, packed ice, or bonded deposits.
What information is required to quote Main Broom?
Send the part or machine drawing, photos of road, yard, parking area, curb, gutter, and sweeper pickup path, Main broom working width, Main broom diameter, Wafer or section width, and Filament diameter, the residue description, wet or dry conditions, motion or use method, temperature, preferred Polypropylene PP and Nylon PA, quantity, and the existing interface or sample.
RELATED BRUSH RESOURCES
Recommended Reading & Related Brush Resources
Custom Road Sweeper Brooms
Choose a road sweeper broom when a machine must lift and direct litter, sand,…
Explore this brush type
Road Sweeping
For Road Sweeping, the brush must reach the working area, disturb or collect sand…
Review application guidance
Floor Scrubbing
For Floor Scrubbing, the brush must reach the working area, disturb or collect dust/soil/oil…
Review application guidance
Polypropylene PP
Polypropylene PP is selected from its stiffness, recovery, wear, wet-service, chemical, and temperature behavior.
Compare material considerations
Nylon PA
Nylon PA is selected from its stiffness, recovery, wear, wet-service, chemical, and temperature behavior.
Compare material considerations
Sweeper Brush Selection: Main Broom vs Side Brush
Learn how to select the right sweeper brush for your floor type and debris.
Read related guideWhen Is a Main Broom the Right Choice for Warehouse Dust?
Find out when a main broom is the correct brush for warehouse dust control.
Read related guideCustom Manufacturing RFQ
Upload the Brush Drawing, Product Photo or Sample Details
Please include the main sizes, application, residue, preferred material, interface, quantity, and any drawing or sample available.
Custom Brush RFQ
Send Your Brush Project
Upload a drawing, product photo, or sample photo and provide the core dimensions and cleaning conditions.