Material
PVC Board Brush Base
PVC Board Brush Base is evaluated as a brush component material rather than as filament. Select the component material from the working load, mating geometry, connection method, exposure conditions, and maintenance process.
Material Overview
PVC board is a rigid compounded polyvinyl chloride sheet used as a structural brush backing or plate.
In a finished brush, PVC Board Brush Base is controlled by section geometry, support, attachment, working load, environmental exposure, and the cleaning method used on the assembly. Component performance depends on material plus geometry, interface, mating parts, manufacturing method, and acceptance criteria.
Material Properties
| Density | 1.35–1.45 g/cm³ |
|---|---|
| Board thickness | 3–30 mm |
| Use temperature | -10–60°C |
| Water absorption | below 0.1% |
| Machining tolerance | ±0.2–0.5 mm |
Brush Applications
For PVC Board Brush Base, directly related brush structures include Machine Table Brush Plates and Disc Brushes. Applications related to PVC Board Brush Base include Brick, Tile & Building Material Machine Brush Use, Industrial Machine Cleaning, Dust Removal, and Mold Cavity Cleaning.
Specification and Customization
Material form
Rigid Board / Machined Base
Common forms
Rigid PVC sheet or board; machined block; drilled plate backing.
Grade
Rigid PVC board grade
Reference standard
ISO 527-1:2019; ASTM D638; ISO 62:2008; ASTM D570-22; ISO 868:2003; ASTM D2240-15(2021); ISO 4892-3:2024; ASTM G154-23; UL 94; ISO 139; ISO 5079; ISO 20743
Limitations and Alternatives
Lower heat and stiffness margin than metal, possible creep and uncertain fastener retention under cyclic load.
Frequently Asked Questions
What are the key properties of PVC Board Brush Base brush material?
PVC board is a rigid compounded polyvinyl chloride sheet used as a structural brush backing or plate. Direct data: Density: 1.35–1.45 g/cm³; Board thickness: 3–30 mm; Use temperature: -10–60°C; Water absorption: below 0.1%; Machining tolerance: ±0.2–0.5 mm.
Where is PVC Board Brush Base used in cleaning brushes?
Wet block brushes, guard panels and strip-brush backing under modest structural and temperature loads.
How does filament geometry change PVC Board Brush Base brush stiffness?
PVC Board Brush Base changes brush stiffness through filament diameter, free trim, density, crimp, and contact. Use finer filament and longer trim for conformable contact; use coarser filament, shorter trim, or higher density for stronger displacement or cutting.
When should PVC Board Brush Base be replaced by another material?
Compare PVC Board Brush Base with PE board, PP board, hardwood, aluminum holder. Change material when wet stiffness, temperature, chemical resistance, conductivity, particle shedding, or surface marking becomes the limiting factor.
Continue Exploring
Recommended Reading & Related Brush Resources
Custom Machine Table Brush Plates
Choose a machine table brush plate when a broad field of bristles must support,…
Explore this brush typeCustom Disc Brushes
Choose a disc brush when a circular face must scrub, wipe, polish, sweep, or…
Explore this brush type
Brick, Tile & Building Material Machine Brush Use
For Brick, Tile & Building Material Machine Brush Use, the brush must reach the…
Review application guidance
Industrial Machine Cleaning
For Industrial Machine Cleaning, the brush must reach the working area, disturb or collect…
Review application guidance
Dust Removal
For Dust Removal, the brush must reach the working area, disturb or collect loose…
Review application guidance
Mold Cavity Cleaning
For Mold Cavity Cleaning, the brush must reach the working area, disturb or collect…
Review application guidance
Mining Boot Cleaning & Heavy-Duty Footwear Brush Use
For Mining Boot Cleaning & Heavy-Duty Footwear Brush Use, the brush must reach the…
Review application guidance
Floor Scrubbing
For Floor Scrubbing, the brush must reach the working area, disturb or collect dust/soil/oil…
Review application guidanceCustom Manufacturing RFQ
Discuss This Material
Share the working surface, residue, dimensions, material direction, interface, quantity and drawing or sample photo.
Custom Brush RFQ
Request a Custom Cleaning Brush Quote
Upload a drawing, product photo, or sample photo and provide the core dimensions and cleaning conditions.