Drill Brush Attachment
Custom drill brush attachments with nylon PA filaments for powered cleaning, deburring, and surface finishing.
CLEANING BRUSH PRODUCT CENTER
Custom Cleaning Brush Products by Category
Browse 484 cleaning brush products through commercial product categories first. Use search or required dimensions when you already know a name or size; use the Brush Type, Application and Material hubs, and the selection guides, later for technical selection.
Drill Brush Set
Drill brush set with nylon PA and PP fill, 50–150 mm heads, and 6.35 mm hex shanks.
- Head Ø
- 50–150 mm
Dryer Vent Cleaning Brush
Flexible dryer vent cleaning brush clears lint, dust, and pet hair from 3–6 inch ducts. Modular rods reach 1–10 m.
- Head Ø
- 102–140 mm
Dust Collector Filter Element Cleaning Brush
Dust collector filter element cleaning brush with soft nylon filaments for pleated cartridge and bag filters, matched.
- Head Ø
- 15–90 mm
- Head length
- 200–450 mm
- Handle
- 200–500 mm
Dust Removal Lithium Battery Brush
Dry-contact brush for lithium battery electrode manufacturing.
Dust Removal Printing Brush
Custom dust removal printing brush with nylon PA or conductive fiber.
Dusting Brush
Custom dusting brush with nylon PA fill for dry dust, fiber, and fine-particle removal from equipment, conveyors, panels.
- Head Ø
- 30–400 mm
- Handle
- 150–600 mm
Earbud & Charging Port Cleaning Brush
Ultra-fine antistatic filaments reach the bottom of charging ports and speaker mesh, lifting lint and earwax without scratching.
- Head Ø
- 2–12 mm
- Head length
- 5–30 mm
- Handle
- 90–160 mm
Electric Scrubber Brush
Custom electric scrubber brushes with nylon PA/PP fill for floor scrubbers, deck machines, and powered rotary tools.
- Head Ø
- 100–700 mm
- Head length
- 100–1200 mm
Electronic Cigarette Mouthpiece Brush
Custom electronic cigarette mouthpiece brush for vape mouthpiece bores and air paths.
- Head Ø
- 3–12 mm
- Head length
- 10–50 mm
- Handle
- 80–200 mm
End Brush
Shank-mounted end wire brushes for die grinders, drills and flexible shafts.
- Head Ø
- 11–32 mm
End Tuft Brush
End tuft brush with brass wire or nylon PA filament for spot rust, oxide, paint and residue removal.
- Head Ø
- 20–350 mm
- Head length
- 10–400 mm
How is this catalogue organised?
By the cleaning job you arrive with, not by how the brush is made. A category groups products that solve the same kind of problem, so a rotary brush and a hand brush can sit side by side if they clean the same thing.
The technical route is separate and deliberately so. Use brush types when you know the form and the mounting, materials when the filament has to survive something specific, and applications when you know the job but not the tool. Every product page links back into all three.
What do you need from me to quote one of these?
Every product here is made to order, so the catalogue entry is a starting construction rather than a stock item. Four things move it to a quotation:
- The surface and the residue — what is being cleaned and what has to come off it.
- The access — the opening, gap or depth the brush has to work through.
- The interface — shaft, thread, bore, bolt pattern, or hand held.
- The quantity — it changes the filament and the packing, not just the price.
A drawing, a photograph or the old brush covers most of this on its own. Technical resources lists the dimensions a quotation needs stated.
What if none of these is quite right?
That is the normal case rather than the exception. The catalogue shows constructions that have been built before; it is not the limit of what can be built. Send the job and the closest entry here, and the differences get worked out as a specification.
Need a Brush Built From a Drawing or Sample?
Send the cleaned part, residue, dimensions, mounting interface, material direction, quantity, and product drawing or photo.