Rotary Chain Brush
A driven cylinder rotating against a moving chain, clearing grease and packed debris from link plates, rollers.
- Head Ø
- 15–50 mm
- Head length
- 30–100 mm
- Handle
- 180–300 mm
PRODUCT CATEGORY
Industrial Roller Brushes
Roller brushes are machine components. Their outside diameter, working length, core or shaft, trim pattern and rotation all affect contact across the process. This category covers rotary brushes used for cleaning, dust removal, film, plastics, furnace, filling and other production tasks.
Browse Industrial Brush Rollers
Compare straight, spiral and application-specific rollers used for dust removal, filling lines, plastic processing, film, furnaces and general machine cleaning.
SS316 Furnace Roller Brush
SS316 furnace roller brush for high-temperature industrial cleaning. 200 mm diameter, 1600 mm face, SS316 wire bristles, quick-change coupling.
- Head Ø
- 200 mm
- Head length
- 1600 mm
Brush Roller Film
Custom brush roller for dust, lint and static particle removal from film and web lines.
- Head Ø
- 50–300 mm
- Head length
- 200–5000 mm
Brush Roller Pharmaceutical
Custom pharmaceutical brush rollers for tablet and capsule dedusting, polishing, and transfer.
- Head Ø
- 60–400 mm
- Head length
- 100–2500 mm
Brush Roller Recycling Plastic
Custom brush roller for plastic recycling lines.
- Head Ø
- 40–800 mm
- Head length
- 100–5000 mm
Etching Line Brush
Custom etching line roller brush with PVA, PU, PBT or nylon fill and 100–1500 mm working width.
- Head Ø
- 40–250 mm
Nylon Roller Brush
Custom nylon roller brushes for conveyor, web, and production-line cleaning. Nylon PA filament, 35–600 mm diameter, 100–3000 mm working length.
- Head Ø
- 40–800 mm
- Head length
- 100–5000 mm
Plastic Flake Washing Brush
Wet-process roller brush for PET, HDPE and PP flake washing. Scrubs labels, adhesives and fines.
- Head Ø
- 40–800 mm
- Head length
- 100–5000 mm
Industrial Roller Cleaning Brush
Custom industrial roller cleaning brushes for conveyors, rollers, chains, rails, and web paths.
- Head Ø
- 40–800 mm
- Head length
- 100–5000 mm
Spiral Wound Roller Brush
Custom spiral wound roller brushes for conveyor belts, web paths, rails and machine guides.
- Head Ø
- 60–500 mm
- Head length
- 100–3000 mm
Tampico Fiber Brush Roller
Custom Tampico fiber brush rollers for conveyor, web, and machine guide cleaning.
- Head Ø
- 40–800 mm
- Head length
- 100–5000 mm
Brush Roller Lithium Battery
Custom brush roller for lithium battery electrode lines.
- Head Ø
- 60–150 mm
Grain Polisher Brush
Replace or specify grain polisher brush rollers with nylon PA filament in 100–2500 mm widths, 60–300 mm OD.
- Head Ø
- 60–400 mm
- Head length
- 100–2500 mm
Steel Wire Brush Roller
Custom steel wire brush roller for conveyor and production line cleaning.
- Head Ø
- 60–300 mm
Wire Roller Brush
Driven wire cylinder to 3000 mm working length in steel, stainless or brass fill, clearing carryback from belts.
- Head Ø
- 40–800 mm
- Head length
- 100–5000 mm
Cattle Brush
Powered cattle brush: 500 mm roller at 22-35 rpm, animal-triggered start, 10-90 s delay stop, overload and reverse.
- Head Ø
- 500 mm
- Head length
- 500–600 mm
Define the Roller as a Machine Part
Before choosing filament, lock down the geometry and the job: where the roller sits, how it rotates and what the surface should experience.
Outside diameter and working length
OD controls contact and machine clearance; working length must cover the process width without interfering with bearings or frames.
Core, shaft and mounting
A roller cannot be specified reliably without the core ID/OD, shaft ends, journals, keyways or mounting arrangement.
Pattern and density
Full-fill, spiral, strip and patterned layouts change contact, debris escape and product handling.
Speed and contact pressure
Rotation and interference affect heat, wear and surface action. High-speed rollers need stable balance and suitable trim.
Industrial Rollers Are Defined by Geometry Plus Process
A furnace roller brush, dust-removal roller and film brush may share a cylindrical body, but temperature, surface sensitivity, density and contact pattern differ. Product function must be specified with the roller dimensions.
Roller Brush Engineering Options
Outside diameter, working length, core, shaft, hub, helix, row spacing, trim length, density, filament and balancing direction can be customized from a drawing or sample.
- Outside diameter
- Working length
- Core
- Shaft
- Hub
- Helix
- Row spacing
- Trim length
- Filament density
- Filament
- Balancing
Send the Roller Drawing or Existing Sample
Provide OD, working length, core/shaft details, speed, contact surface, residue and required brush action. That allows direct engineering rather than catalog guessing.