Brush Plate Punch Press
Custom-size tufted brush plates for CNC punch press tables.
- Head Ø
- 50–1500 mm
- Head length
- 100–3000 mm
PRODUCT CATEGORY
Machine, Mold & Tool Cleaning Brushes
Machine and mold cleaning is usually local, precise and maintenance-driven. Residue collects in cavities, guide rails, sealing jaws, dies and tool interfaces where access matters as much as cleaning force. This category groups brushes around those service tasks instead of around a generic bristle material.
Browse Mold, Tool, Fixture & Machine Brushes
Compare mold-cleaning brushes, CNC and tool brushes, guide-rail brushes, sealing-bar and jaw cleaners, fixture brushes and other maintenance products.
Cleaning Brush Jewelry
Soft goat hair and nylon jewelry brushes for removing polishing compound, tarnish, skin oils and fine debris.
- Head Ø
- 8–25 mm
- Head length
- 25–50 mm
- Handle
- 165 mm
Cleaning Brush Mold
Head widths 10 to 100 mm and trim 10 to 50 mm reach rib details, vent slots.
- Head Ø
- 1–100 mm
- Head length
- 10–150 mm
- Handle
- 100–500 mm
CNC Tool Cleaning Brush
CNC tool cleaning brush with bronze or nylon bristles for ER collets, HSK/BT tapers, spindle noses, and mold.
- Head Ø
- 10–400 mm
- Head length
- 20–300 mm
- Handle
- 120–1000 mm
Die Casting Mold Cleaning Brush
Brass wire is softer than hardened die steel, so it works baked release agent, carbon and flash off.
- Head Ø
- 1–100 mm
- Head length
- 10–150 mm
- Handle
- 100–500 mm
Fixture Cleaning Brush
Industrial fixture cleaning brush with brass wire or nylon PA fill for mold cavities, parting lines, fixture faces.
- Head Ø
- 10–400 mm
- Head length
- 20–300 mm
- Handle
- 120–1000 mm
Heat Sealing Bar Cleaning Brush
Custom heat sealing bar cleaning brushes with brass wire or heat-resistant nylon PA filaments.
- Head Ø
- 10–200 mm
Heat Treatment Fixture Brush
Clean heat scale, oxide, and carbon from furnace baskets, racks, trays, and pins.
- Head Ø
- 60–600 mm
- Head length
- 200–4500 mm
Injection Mold Cleaning Brush
Injection mold cleaning brush with brass wire or nylon PA filaments for cavity, vent, and parting line maintenance.
- Head Ø
- 1–100 mm
- Head length
- 10–150 mm
- Handle
- 100–500 mm
Lipstick Mold Cleaning Brush
Custom lipstick mold cleaning brush with nylon PA or PBT filaments for cavity, split line, and mating surface.
- Head Ø
- 1–100 mm
- Head length
- 10–150 mm
- Handle
- 100–500 mm
Machine Guide Rail Brush
Custom machine guide rail brush for cleaning slots, rails, pins, and narrow machine paths.
- Head length
- 100–3000 mm
Machine Tool Brush
Configure a machine tool brush to clear chips, coolant, scale, and weld spatter from machine ways, T-slots, dies.
- Head Ø
- 10–400 mm
- Head length
- 20–300 mm
- Handle
- 120–1000 mm
Machine Tool Punch Press
Custom nylon cleaning brush for punch presses.
- Head Ø
- 50–1500 mm
- Head length
- 100–3000 mm
Mining Automatic Boot Cleaning Brush
Custom automatic boot cleaning brushes for mining boot wash stations: stiff PP/PET/nylon sole rollers and side brushes.
- Head Ø
- 150–300 mm
- Head length
- 100–5000 mm
Powder Press Cleaning Brush
Custom powder press cleaning brushes with goat hair, microfiber, or nylon PA fills for tablet presses, powder metal.
- Head Ø
- 10–400 mm
- Head length
- 20–300 mm
- Handle
- 120–1000 mm
Rubber Mold Cleaning Brush
Rubber Mold Cleaning Brush for mold maintenance: clean release agent, vulcanized flash, carbon, and oils from cavities, vent.
- Head Ø
- 1–100 mm
- Head length
- 10–150 mm
- Handle
- 100–500 mm
Sealing Jaw Cleaning Brush
Remove melted film, carbonized polymer and adhesive buildup from heated sealing jaws, crimp bars and knife edges.
- Head length
- 50–3000 mm
SiC Mold Cleaning Hand Brush
Silicon carbide abrasive nylon hand brush removes release agent, flash, and baked deposits from mold cavities and parting.
- Head Ø
- 25 mm
- Head length
- 100 mm
- Handle
- 150 mm
Brass Precision Parts Brush
Solid brass precision parts brush with an 18 x 80 mm rectangular head for removing chips, oil.
- Head Ø
- 18 mm
- Head length
- 80 mm
- Handle
- 120 mm
Spindle Taper Cleaning Brush
Non-marring brass wire and nylon spindle taper cleaning brushes for HSK, SK, BT, and CAT machine spindles.
- Head Ø
- 3.2–50.8 mm
- Head length
- 25–120 mm
- Handle
- 152–406 mm
What Must Be Removed Without Altering the Tool Surface?
Tool steel, coatings and precision interfaces can be damaged by an overly aggressive brush, so residue and surface condition should be considered together.
Mold or tool surface
Polished cavities, coated tools and precision mating surfaces need controlled contact; rougher maintenance areas can tolerate firmer cleaning.
Residue type
Plastic flash, rubber residue, powder, oxide, grease and heat-sealed buildup require different filament or abrasive choices.
Access and feature size
Deep cavities, rails, slots and narrow jaws need thin, angled or small-diameter heads rather than broad hand brushes.
In-machine or removed-part cleaning
Cleaning in place may limit handle length, angle and debris control; bench cleaning allows a wider range of tools and pressure.
A Mold Brush and a Machine Brush Are Not the Same Maintenance Tool
A mold brush may need to preserve a precision cavity finish, while a guide-rail or sealing-jaw brush is selected around a different geometry and residue. The machine part determines the safe cleaning action.
Machine & Mold Brush Customization
Head width, diameter, angle, handle reach, filament, abrasive level and mounting can be tailored. For repeat maintenance, a drawing of the cavity, rail or tool interface helps define the brush.
- Head width
- Head diameter
- Angle
- Handle reach
- Filament
- Abrasive level
- Mounting
Send the Tool Surface and Residue
Provide the mold, tool or machine area, residue, surface finish, access dimensions and cleaning method. We can then choose a brush that removes contamination without unnecessary surface change.