Ceramic Substrate Cleaning Brush
Custom inline ceramic substrate cleaning brush with PVA/PU sponge and nylon PA filament media for dust, slurry.
- Head Ø
- 40–250 mm
PRODUCT CATEGORY
Glass & Ceramic Processing Brushes
Glass and ceramic production demands consistent surface contact without uncontrolled scratching, chipping or contamination. Washing rollers, edge brushes, glaze-line tools and conveyor brushes all interact with brittle or finished surfaces, but at different stages and with different residues.
Browse Glass Washing, Ceramic & Glaze-Line Brushes
Compare glass-washing rollers, glass-edge disc brushes, ceramic cleaning and glaze-line products, conveyor rollers and specialized machine brushes.
Glass Cleaning Brush
Custom glass cleaning brush with 50–200 mm soft foam or microfiber contact for dust, glass fines, slurry.
- Head Ø
- 80–300 mm
- Head length
- 10–80 mm
80x500mm PBT Glass Washing Roller Brush
80 mm x 500 mm PBT roller brush for glass washing lines. Scratch-safe cleaning of flat and coated glass.
- Head Ø
- 80 mm
- Head length
- 500 mm
Brush Roller Glass
Custom brush roller glass for flat glass washing machines. Nylon non-marring filaments, widths 600–3300mm, machine-matched cores. Request specifications.
- Head Ø
- 100–250 mm
- Head length
- 300–2000 mm
Ceramic Cleaning Brush
Custom ceramic cleaning brush with nylon PA or PBT abrasive filaments for tiles, GreenGrill grates, and ceramic coatings.
- Head Ø
- 80–300 mm
- Head length
- 10–80 mm
Ceramic Glaze Line Brush
Custom ceramic glaze line brush for wiping excess glaze, dusting green ware, and sealing line gaps.
- Head length
- 100–3000 mm
Ceramic Glaze Line Disc Brush
Custom ceramic glaze line disc brushes remove glaze residue, edge burrs, and ceramic fines from tile faces.
- Head Ø
- 25–500 mm
Glass Washing Machine Brush Roller
Custom glass washing machine brush rollers for flat glass washer lines.
- Head Ø
- 100–250 mm
- Head length
- 300–2000 mm
Stainless Steel Brush Roller Glass
Fine non-marring nylon tips on a corrosion-resistant stainless shaft give full-width contact that clears glass fines without scratching.
- Head Ø
- 100–250 mm
- Head length
- 300–2000 mm
Ceramic Green Body Cleaning Brush
Soft goat hair, horsehair, or PBT brushes for removing dust from unfired ceramic green bodies.
- Head Ø
- 10–400 mm
- Head length
- 20–300 mm
- Handle
- 120–1000 mm
Brick and Tile Machine Brush
Industrial brick and tile machine brush for cleaning molds, pallets, guides and transfer surfaces.
- Head Ø
- 40–800 mm
- Head length
- 100–5000 mm
What Surface Condition Must the Brush Preserve?
Finished glass, green ceramic bodies, glaze lines and edge-processing stages tolerate different contact force and abrasive behavior.
Glass or ceramic process stage
Raw or green-body cleaning, washing, glazing and finished-surface handling each have different surface sensitivity.
Slurry, particles or edge residue
Wet slurry and loose particles require different transport and cleaning behavior from edge-conditioning or dried process residue.
Scratch and chipping risk
Filament stiffness, density and contact pressure should be chosen to clean without creating visible marks or edge damage.
Machine roller, disc or block interface
Production brushes need exact OD, width, shaft, lock or block geometry to maintain alignment in the machine.
Glass Washing and Ceramic Glaze Brushes Are Different Process Tools
A washing roller is selected for broad wet surface contact, while a glaze-line or edge brush works around different residue and geometry. Similar materials do not make the process requirements interchangeable.
Glass & Ceramic Brush Customization
Roller outside diameter, working width, disc size, block/lock interface, trim, density and filament can be tailored. Include line speed, surface condition and wet chemistry where relevant.
- Roller outside diameter
- Working width
- Disc size
- Block or lock interface
- Trim length
- Filament density
- Filament
Share the Process Stage and Surface
Provide whether the brush is for washing, conveying, glazing, edge work or another stage, plus surface finish, residue, line speed and mounting dimensions.